Frameless Glass Facade / Structural Glass System

Frameless glass facade systems utilizing jumbo glass panels with minimal visible support structure. Our structural glass facade solutions include point-fixed spider fitting systems,structural glass fin systems,cable-net supported glazing,and fully frameless silicone-jointed systems. Jumbo glass panels up to 3.3m x 10m minimize joints for maximum transparency. Glass fins,tension rods,or cable nets provide lateral support against wind loads with minimal visual intrusion. FEA-verified structural design meeting international building codes. Ideal for flagship corporate entrances,luxury retail,museum atria,and architectural features demanding maximum transparency and minimal structure.

Frameless Glass Facade and Structural Glass Systems represent the ultimate expression of architectural transparency,eliminating the visible aluminum or steel framing that dominates conventional curtain wall construction. In these systems,the glass itself serves as the primary structural element resisting wind loads,with support provided by discrete structural elements designed to minimize their visual impact. The jumbo glass panels are connected to the building structure through point-fixed fittings (spider fittings,rotules,or clamping fittings) that transfer wind loads to a secondary support structure of glass fins,tension cables,stainless steel rods,or lightweight steel trusses. The glass-to-glass joints between panels are sealed with weather-grade structural silicone,typically 15-25mm wide,creating a flush exterior surface with no projecting framing elements. The result is a facade that appears to be a continuous,uninterrupted sheet of glass from floor to floor and across the full building width.

Point-fixed glass systems using spider fittings are the most common structural glass facade typology. The glass panels are drilled at their corners or edges to accept stainless steel fittings (typically 50-80mm diameter) that penetrate the glass and connect to articulated arms on a central spider hub. The spider hub transfers loads to the secondary support structure through stainless steel tension rods,compression struts,or direct attachment to glass fins. Each point-fixed connection must distribute concentrated loads into the glass without causing local stress concentrations that could initiate fracture. Articulation in the spider fittings accommodates glass deflection under wind load,building movement,and thermal expansion without binding or overloading the glass at the connection points. Glass fin-supported facades use vertical glass beams (fins),typically 300-600mm deep and spanning floor-to-floor,laminated from multiple plies of SGP or PVB tempered glass for structural redundancy. The facade glass panels span horizontally between fins,connected by spider fittings or clamping fittings at the glass edge. Cable-net facades use a grid of pre-tensioned stainless steel cables (typically 10-30mm diameter at 1-2 meter spacing) as the secondary structure,with the glass panels point-fixed to the cable nodes. The cable net acts in tension,catenary,or as a prestressed net,resisting wind loads through geometric stiffness while being virtually transparent when viewed directly.

Our structural glass facade engineering includes complete structural analysis per applicable building codes with finite element modeling validated by physical load testing of full-scale mockups. Glass stress,deflection,and buckling analysis uses ASTM E1300 and EN 16612 methodologies. Connection design including glass-to-metal contact stress at point fittings is analyzed per approved fitting manufacturer data. We provide complete design documentation including structural calculations,connection details,glass specifications,and installation methodology for building permit approval. Coordination with the project structural engineer for building attachment design and deflection compatibility is provided. All components are fabricated to project specifications with factory quality control and third-party testing per specification requirements.

Do you need Custom Glass Manufacturing?