Tempered insulated glass units combining the structural strength and safety of tempered glass with the thermal insulation of sealed double or triple glazing. Each glass pane is individually tempered,achieving 4-5x strength over annealed glass with safe-break characteristics,then assembled into fully sealed IGUs. All tempered panes are heat-soak tested to eliminate spontaneous breakage risk. Available in clear,tinted,Low-E,and reflective coated configurations. The tempered construction provides thermal stress resistance for large panels,high-wind-load capacity,and safety code compliance for doors,sidelites,and accessible glazing. IGCC and SGCC certified.
Tempered Insulated Glass Units combine the essential building code safety requirements of tempered glass with the thermal and acoustic insulation performance of sealed multiple glazing. In many architectural applications,safety codes demand tempered glass for doors,sidelites,windows adjacent to doors,bathroom enclosures,and glazing in hazardous locations defined by the International Building Code. Simultaneously,energy codes require thermal insulation through double or triple glazing. Tempered IGUs solve both requirements in a single product: each glass component is fully tempered to meet ANSI Z97.1 or EN 12150 safety standards,then the tempered panes are assembled into a sealed IGU with spacer,desiccant,and dual-seal edge construction. This approach provides code-compliant safety,thermal insulation,and condensation resistance in one factory-fabricated unit ready for glazing installation.
The thermal performance of tempered IGUs is identical to annealed IGUs of the same configuration,as the tempering process does not affect the glass substrate’s thermal conductivity or the optical properties of the coating. However,the tempered glass panes provide significant structural advantages. Tempered glass has a design strength of approximately 93 MPa compared to 28 MPa for annealed glass under ASTM E1300,allowing thinner glass to meet the same design loads,or enabling larger panel sizes without increased thickness. This strength advantage is particularly valuable for large commercial IGUs in curtain wall and storefront systems where wind load governs glass thickness selection. The thermal stress resistance of tempered glass (capable of withstanding temperature differentials exceeding 200 degrees Celsius) is essential for IGUs with heavy edge shadow conditions,spandrel panels with opaque backing,and partially shaded glazing where uneven solar heating creates thermal stress that would fracture annealed glass. Heat soak testing of all tempered panes eliminates the remote but consequential risk of spontaneous nickel sulfide breakage,ensuring long-term safety in critical applications.
Our tempered IGU production begins with precision cutting and edge-working of annealed glass,followed by tempering in computer-controlled horizontal furnaces. Each pane undergoes surface compression verification,fragmentation testing per batch,and heat soak testing per EN 14179-1 in our dedicated HST furnace. The fully tempered panes are then processed through our insulating glass line with careful handling to prevent edge damage that could compromise temper integrity. Standard configurations include 6mm or 8mm tempered glass for residential applications,10mm or 12mm for commercial curtain wall and storefront,and 15mm or 19mm for structural glass facades. Coated glass options include pyrolytic Low-E (hard coat) for single-surface tempering compatibility and post-temperable soft-coat Low-E for premium performance. All tempered IGUs are labeled with SGCC certification marks for North American markets or CE marking for European compliance,with complete traceability documentation provided per unit.